se
Model | W12 |
Category | In-wall |
Dimension | 86*86*32mm |
Interface | One 10/100/1000 Mbps Ethernet Port One 10/100/1000 Mbps Ethernet Port (PoE) |
Button | 1*Reset |
LED Indicator | 1*SYS |
Maximum Power Consumption | 7.3W |
Power Supply | PoE 802.3af |
Max. Number of Clients | 256 |
Recommended Clients | 35 |
Antenna | 4dBi+4dBi |
2.4GHz maximum power | 18+/-1.5dBm |
5GHz maximum power | 17+/-1.5dBm |
Reception Sensitivity | 2.4GHz 802.11b -88dBm 2.4GHz 802.11n (MCS7) -72.5dBm 5GHz 802.11a -92.5dBm 5GHz 802.11n (MCS7) -72dBm |
Frequency Range | 2.4GHz&5GHz |
Standard&Protocol | IEEE 802.11b/g/n/ac(wave2) |
Maximum wireless speed | 2.4GHz:300Mbps 5GHz:867Mbps |
Bandwidth | 20MHz/40MHz/80MHz |
Operating Mode | AP/Client+AP |
Max. No. of SSID | 2.4GHz: 6 5GHz: 4 |
Hide SSID | Supported |
OFDMA | Supported |
Beamforming | Supported |
Fast roaming(802.11k/v/r) | Supported |
WEP | Supported |
WPA-PSK | Supported |
WPA2-PSK | Supported |
WPA | Supported |
WPA2 | Supported |
Access control | Supported |
Adjustable power transmit | Supported |
Automatic channel | Supported |
AP isolation | Supported |
Guest network | Supported |
Connected clients control | Supported |
RSSI Threshold | Supported |
Weak signal terminal elimination | Supported |
Prioritize 5 GHz | Supported |
VLAN tagging for SSID | Supported |
LED control | Supported |
MU-MIMO | Supported |
Diagnostics tool | Supported |
Reboot at specified interval | Supported |
Scheduled reboot | Supported |
System Logs | Supported |
Device management | M3 or Tenda Router with AP Controller feature |
Firmware upgrade | Supported |
Reboot | Supported |
Reset | Supported |
Backup configuration | Supported |
Restore configuration | Supported |
Default IP | 192.168.0.254 |
Default username | admin |
Default password | admin |
Operation Temperature | -10℃ ~ 45℃ |
Operating Humidity | 10%~90% non-condensing |
Storage Temperature | -30℃ ~ 70℃ |
Storage Humidity | 5%~90% non-condensing |