RX2L Pro Download(8)
RX2L Pro FAQs(29)
New

RX2L Pro  Dual Band Gigabit Wi-Fi 6 Router

Dual Band Gigabit Wi-Fi 6 Router

RX2L Pro is an entry-level dual-band Gigabit Wi-Fi 6 router designed for home users, its dual-band concurrent speed is up to 1501 Mbps(5GHz: 1201 Mbps 2.4 GHz: 300 Mbps). RX2L Pro is equipped with 2 high-performance modules and 5 external high-gain antennas,it can effectively enhance signal transmission and reception sensitivity, and extend Wi-Fi 6 to every corner of your home.supporting Tenda Wi-Fi+ technology, it can be networked with Tenda products that support Wi-Fi+ with one click, you can enjoy a broder and smoother network. More devices can be connected to the internet at the same time with lower lag, and the transmission efficiency is significantly improved by OFDMA+MU-MIMO technology. With 4 Gigabit Ethernet ports,wired devices can be connected with faster speed, which make sure all kinds of wired devices work smoothly,just enjoy the ultra-speed network.
   [Router/Mesh-2.1] What should I do if my router's Wi-Fi is slow
   [ALL-4] Why Tenda HTTPS Web Interface Is Detected As Unsecure by Some Web Browsers
   [Router/Gateways/Mesh-4.3] How to use Iperf to test the speed
   [ALL-2.2] Why Do I Fail to Access tendawifi.com
   [ALL-4] How to find your Tenda router's IP address
   [Router/Mesh/Gateway-2.5] Network Speed Q&A
   [MG-3] Gate How to set VPN
   [Router/Mesh-3.3] How to set Guest WiFi
   [Router/Mesh-4] The Questions Before Buying.
   [Router-2.4] What should I do if the router disconnects on and off several times in one day or one week
   [Router/Mesh-2.3] What happened if my 2.4G or 5G WiFi(SSID) can't not find
   [Router-2] What should I do if the router get bricked
   [Router/Mesh-2.2] What should I do if the cloud account doesn't show up & keep buffering
   [Router/Mesh-3.1] How to Clone MAC Address on My Tenda Router
   How to set up the working mode which mode I should choose as a extenderrepeater
   [Router/Mesh-1.1] How to set up as an add-on node of Tenda router
   [ALL-1.4] How to reset Tenda device to factory default
   Tenda (Tenda) AX3000 Pro terminal device can not find the router wireless signal
   [Router-2.3] What should I do if I cannot access the Internet after my router is set up (New interface)
   [ALL-4] Wireshark capture Router interface packet operation guide
   How to find the proper MTU size for my network
   [Router-3.2] How to Change Channel and Channel Width on a Tenda Router
   Troubleshooting methods for wireless signals that cannot connect to RX2LPro.
   Steps for RX2LPro to correctly return to factory Settings
   About unable to search RX2LPro wireless signal troubleshooting method
   About RX2LPro configuration can not be connected to the Internet solution
   About RX2LPro can not access tendawifi.com solution
   [ALL-1.7] How to find the hardware version on a Tenda device
   [Router/Mesh-2.5] My speed is slow when I connect to router WiFi, what should I do