[DSL-3] How to use Wireless Repeating

How to use Wireless Repeating

Step 1: On the computer connected to the Router, start a browser (Chrome/FireFox/ Internet Explorer 10 and higher versions supported). Access the DSL Router management IP address 192.168.1.1

IMG_256

Step 2: Enter the Default username: admin Default password:admin and click Login to enter the web UI of the Router.

Step 3:Preconditions (taking V12 and AC6 as examples):

Set the LAN ip of AC6 to 192.168.1.1, the address pool to 192.168.1.2~192.168.1.100, and create a WAN that can access the Internet

Set the LAN ip of V12 to 192.168.1.150, the address pool to 192.168.1.151~192.168.1.254, and no WAN needs to be created

Note: This is mainly to ensure that the two devices are in the same network segment

The purpose of a repeater is to expand the coverage of a wireless network by adding wireless APs at the edge of a wireless network. When setting up wireless configuration, you must follow the protocol rules:

  1. Both wireless devices must support the WDS function.
  2. The wireless network channel of both wireless devices must be the same. The default value is usually "Auto", it is recommended to set it manually to ensure the same channel.
  3. The security settings of the two routers must be the same, the key is that the security mechanism and password must be the same (the SSID can be configured differently)
  4. Both wireless devices start the WDS function and register each other's router's Wireless MAC address as the identity for establishing WDS.

  1. The wireless client connected to the 2.4G wireless of V12, successfully obtained the address from the address pool of AC6, and successfully accessed the Internet.

Was this article helpful to you?

Very Good(0)Article Views(786)