How to setup the modem
router for PPPoE internet connection mode
Product
line: Wireless Model number:D301
This article will
guide you how to setup the router for PPPoE mode and the steps as below.
Note: If you
have no idea about what is the internet connection type, VPI/VCI value, the
accounts please call your ISP for them.
Part 1:Connect
the devices
Part 2:Configure your computer
Part 3:Setup the router
Part 4:Check
whether you can access internet
Connect
the DSL line with the DSL port of the router, and then connect your
computer with one of the LAN ports by a cable.
Note: after connection the SYS light should be blinking, the WLAN light should be on or blinking, the DSL light should be on or blinking.
1 Click
on Network Connection Icon on the system bar, then click on Open
Network and Sharing Center.(Here is for win7,
other computer please clickHERE.)
2 Click
on Change adapter settings.
3
Right click
on Local Area Connection, then choose thePropertiesoption.
4
Double click
on Internet Protocol Version 4(TCP/IPv4)
5 Choose Obtain an IP address automatically andObtainDNS server address
automatically and then click OK.
6 Also
click onOK on the first Local Connection Properties window.
1Open a browser then type192.168.1.1 in the Address bar, click on Enter.
Note: if you cannot login the management page, please click HERE.
2 Type the Username and Password as admin in
the bars then click on Login to login the setting page of the router.
3 choose country/ISP/VPI/VCI. The connection type you can
choose PPPoE or PPPoA (you can consult your ISP for it if you don’t
know.) then please type in user name and password, set a security
password (at least 8 characters) for your wireless. Click OK to save
the settings.
check
the Device Info，if the Status shows Connected that
means you can access internet, please check.
