RX12L Pro Descărcări(14)
RX12L Pro Întrebări frecvente(26)

RX12L Pro  Router Wi-Fi 6 Dual-Band AX3000,
3×porturi 1Gbps

Router Wi-Fi 6 Dual-Band AX3000,
3×porturi 1Gbps

RX12L Pro is a dual-band Gigabit Wi-Fi 6 wireless router designed for users who pursue performance experience. Both its dual-bands support Wi-Fi 6 (802.11ax) technology and the concurrent rate is up to 2976Mbps (5GHz:2402Mbps, 2.4GHz: 574Mbps). RX12L Pro is equipped with a 12nm process dual-core 1.3GHz CPU to ensure a stable and smooth network environment; supports Wi-Fi+, which can easily solve the problem of stable Wi-Fi coverage in very large homes; equipped with 5 built-in high-power FEMs , Wi-Fi has stronger wall penetration capabilities and longer transmission distances; it uses OFDMA+MU-MIMO technology to allow more devices to access the Internet at the same time, significantly improving transmission efficiency and significantly reducing latency.
   Configurarea inițială, pas cu pas, din interfata web de gestionare a unui router Tenda cu Wi-Fi 6
   Conectare la interfața web de gestionare a unui router Wi-Fi 6 de la Tenda
   [Router/Mesh-2.1] What should I do if my router's Wi-Fi is slow
   [ALL-4] Why Tenda HTTPS Web Interface Is Detected As Unsecure by Some Web Browsers
   [Router/Gateways/Mesh-4.3] How to use Iperf to test the speed
   [ALL-2.2] Why Do I Fail to Access tendawifi.com
   [ALL-4] How to find your Tenda router's IP address
   [Router/Mesh/Gateway-2.5] Network Speed Q&A
   [MG-3] Gate How to set VPN
   [Router/Mesh-3.3] How to set Guest WiFi
   [Router/Mesh-4] The Questions Before Buying.
   [Router-2.4] What should I do if the router disconnects on and off several times in one day or one week
   [Router/Mesh-2.3] What happened if my 2.4G or 5G WiFi(SSID) can't not find
   [Router-2] What should I do if the router get bricked
   [Router/Mesh-2.2] What should I do if the cloud account doesn't show up & keep buffering
   [Router/Mesh-3.1] How to Clone MAC Address on My Tenda Router
   How to set up the working mode which mode I should choose as a extenderrepeater
   [Router/Mesh-1.1] How to set up as an add-on node of Tenda router
   [ALL-1.4] How to reset Tenda device to factory default
   Tenda (Tenda) AX3000 Pro terminal device can not find the router wireless signal
   [Router-2.3] What should I do if I cannot access the Internet after my router is set up (New interface)
   [ALL-4] Wireshark capture Router interface packet operation guide
   How to find the proper MTU size for my network
   [Router-3.2] How to Change Channel and Channel Width on a Tenda Router
   [ALL-1.7] How to find the hardware version on a Tenda device
   [Router/Mesh-2.5] My speed is slow when I connect to router WiFi, what should I do