USB wireless network card can be used to receive WiFi signals, you can also share the computer's own network through the wireless network card to do hot spots. Only when the computer can access the Internet, can the existing network be shared out of the WiFi through the wireless network card. To share the WiFi, you can use the third-party WiFi sharing software or use the Windows built-in sharing hotspot.

 

The following will explain in detail how to share the WiFi signal through the wireless network card of the computer wired network (the computer is plugged into the network cable), which is used to allow wireless devices such as mobile phones to surf the Internet.

 

1、Plug the network card into the computer

 

After the computer is turned on, insert the network card into the USB port of the computer.

 

Install driver

1. After the network card is inserted into the computer, the TENDA driver disk will automatically pop up. Double-click the "Setup.exe" inside to install it.

 

 

Wait until the progress bar reaches 100% and the installation page disappears. When the driver installation is complete (as shown below) is displayed at the lower right corner of the computer, the driver installation is complete.

 

 

 

3. after the driver installation is complete, click the notification icon in the lower right corner, and then click "Mobile hotspot" to turn on the WiFi hotspot.

 

 

If you want to change the WiFi hotspot name and password, you can right-click "Mobile Hotspot" and click "Go to Settings".

Click "Edit" to change the WiFi name and password.