N301-How to setup AP mode

Note: This article will guide you how to setup AP mode and the steps as below.
 
Step 1: Connect your computer to the LAN port. Power on the N301.
 
说明: 3
 
You can also use your smartphone to configure the router.
 
说明: 4
 
Step 2: Open a Web Browser -> Type 192.168.0.1 in the address bar -> Press Enter
 
 
Step 3: Go to Wireless repeating-> Click “AP Mode”, and click “OK” to save all the settings
 
说明: 1
 
After the reboot process is complete, please use tendawifi.com to login to the Web UI.
 
说明: 2
 

In AP mode, any port of the router can be used to connect to the upstream router. In this mode, some functions are ineffective, including Internet Settings, Parental Control, Bandwidth Control, Virtual Server, and so on.


Ti-a fost de folos acest articol?

Foarte bine(18)Vizualizare articole(1599)