TEG1116P-16-150W _Tenda-All For Better NetWorking

TEG1116P-16-150W Download（7）
1Tenda Switch Quick Installation Guide(multi-language)
2TEG1116P-16-150W Installation Guide
3TEG1116P-16-150W CE
4Tenda Lightning Protection Guide
5TEG1116P-16-150W Datasheet
6TEG1116P-16-150W HD Image
7Symbols on Products and Materials
TEG1116P-16-150W FAQs（13）
1 [Switch-4] POE Switch with Camera Knowledge Explanation
2 [Switch-3] How to adjust the working mode of the switch and the role of these modes？
3 [Switch-1.2] How to access the management page of a managed switch
4 [Switch-4] Frequently Asked Questions about Switches
5 [Switch-2.5] Low Speed Common Troubleshooting steps for Tenda Switches
6 [ALL-4] Why Tenda HTTPS Web Interface Is Detected As Unsecure by Some Web Browsers
7 [Router/Gateways/Mesh-4.3] How to use Iperf to test the speed
8 [ALL-2.2] Why Do I Fail to Access tendawifi.com
9 [ALL-4] How to find your Tenda router's IP address
10 [ALL-1.4] How to reset Tenda device to factory default
11 [ALL-4] Wireshark capture Router interface packet operation guide
12 [Switch-2.3] Computers cannot access the Internet after connecting to the switch
13 [ALL-1.7] How to find the hardware version on a Tenda device

TEG1116P-16-150W 1000M&PoE 16-Port Gigabit Ethernet Switch with 16-Port PoE

TEG1116P-16-150W is a Tenda PoE Switch that offers 16 10/100/1000Mbps Base-TX RJ45 ports 1-16 comply with IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 135W and can supply power to and exchange data with APs, IP cameras and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN and isolation to help reduce cabling costs of IP terminals like APs and IP cameras.

Explore

Network standards	IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/ IEEE 802.3af/IEEE 802.3at
LED Indicator	16Link/Act per device 16PoE per device 1*Power per device
Interfaces	16*10/100/1000 Base-T ports(Data/Power)
Transmission media	Recommended: CAT5/5e UTP or better
Dimension	294.0mmx178.0mmx44.0mm
Level of protection	Lightning protection for ports: 6kV Lightning protection for power: 6kV ESD: Air discharge: ±10kV Contact discharge: ±8kV
Forwarding mode	Store-and-forward
Switch capacity	32 Gbps
Packet forwarding rate	23.6Mpps
Buffer	2M
MAC address table	8K
PoE budget	Single port: AF: 15.4W, AT: 30W Whole device: 135W
Power consumption	/
Input voltage	100-240V AC 50/60Hz
Mounting	Desktop mounting: support Wall mounting: support Rack mounting : support
Environment	Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing
Certification	FCC、CE、RoHS