TEG1110PF-8-120W _Tenda-All For Better NetWorking

TEG1110PF-8-120W Download（6）
1Tenda Switch Quick Installation Guide(multi-language)
2TEG1110PF-8-120W Installation Guide
3Tenda Lightning Protection Guide
4TEG1110PF-8-120W Datasheet
5TEG1110PF-8-120W HD Image
6Symbols on Products and Materials
TEG1110PF-8-120W FAQs（13）
1 [Switch-4] POE Switch with Camera Knowledge Explanation
2 [Switch-3] How to adjust the working mode of the switch and the role of these modes？
3 [Switch-1.2] How to access the management page of a managed switch
4 [Switch-4] Frequently Asked Questions about Switches
5 [Switch-2.5] Low Speed Common Troubleshooting steps for Tenda Switches
6 [ALL-4] Why Tenda HTTPS Web Interface Is Detected As Unsecure by Some Web Browsers
7 [Router/Gateways/Mesh-4.3] How to use Iperf to test the speed
8 [ALL-2.2] Why Do I Fail to Access tendawifi.com
9 [ALL-4] How to find your Tenda router's IP address
10 [ALL-1.4] How to reset Tenda device to factory default
11 [ALL-4] Wireshark capture Router interface packet operation guide
12 [Switch-2.3] Computers cannot access the Internet after connecting to the switch
13 [ALL-1.7] How to find the hardware version on a Tenda device

TEG1110PF-8-120W 9GE+1SFP Ethernet Switch With 8-Port PoE

TEG1110PF-8-120W is a 10-port gigabit Ethernet unmanaged PoE switch independently designed by Tenda.It supports IEEE 802.3af/at standards for PoE power supply, capable of transmitting data and supplying power for 8 HD PoE cameras or gigabit APs. The maximum PoE output of a single port is 30 W and the total networking in such scenarios as SMEs, residential areas, indus power consumption of the switch is 120W. Supporting three-mode toggle, TEG1110PF-8-120W is suitable for complex networking deployment and is your ideal choice for video surveillance and gigabit wireless trial parks, hotels and schools.

Explore

Network standards	IEEE 802.3/IEEE 802.3u/IEEE 802.3ab IEEE 802.3x/ IEEE 802.3af/IEEE 802.3at
LED Indicator	Power Link/Act PoE MAX
Interfaces	(9)1GE RJ45 ports (1)1GE SFP ports
Transmission media	Recommended: CAT5/5e UTP or better
Dimension	177.5mm104mm26mm
Level of protection	Port: 6 KV Power：6 KV
Forwarding mode	Store-and-forward
Switch capacity	20Gbps
Packet forwarding rate	14.9Mpps
PoE budget	Single port: AF: 15.4W, AT: 30W Whole device: 92W
Power consumption	120W
Input voltage	100-240V AC 50/60Hz
Mounting	Desktop mounting: support Wall mounting: support
Environment	Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing
Certification	FCC, CE, RoHS
Funtions	One-key to change network mode: 1. Standard: Default mode. In this mode, all ports can communicate with each other .2. VLAN: In this mode, ports 1 - 8 are isolated from each other, but all of them can communicate with port 9 and SFP1. This mode helps isolate DHCP broadcast and reduce broadcast storm. 3. Extend: In this mode, ports 1 - 8 decrease to 10 Mbps in negotiation rate, but transmit up to 250 m in distance. All ports can communicate with each other