TEF1110P-8-63W _Tenda-All For Better NetWorking

TEF1110P-8-63W Download（8）
1Tenda Switch Quick Installation Guide(multi-language)
2TEF1110P-8-63W Installation Guide
3TEF1110P-8-63W CE
4Safety and Regulatory Information
5Tenda Lightning Protection Guide
6TEF1110P-8-63W Datasheet
7TEF1110P-8-63W HD Image
8Symbols on Products and Materials
TEF1110P-8-63W FAQs（13）
1 [Switch-4] POE Switch with Camera Knowledge Explanation
2 [Switch-3] How to adjust the working mode of the switch and the role of these modes？
3 [Switch-1.2] How to access the management page of a managed switch
4 [Switch-4] Frequently Asked Questions about Switches
5 [Switch-2.5] Low Speed Common Troubleshooting steps for Tenda Switches
6 [ALL-4] Why Tenda HTTPS Web Interface Is Detected As Unsecure by Some Web Browsers
7 [Router/Gateways/Mesh-4.3] How to use Iperf to test the speed
8 [ALL-2.2] Why Do I Fail to Access tendawifi.com
9 [ALL-4] How to find your Tenda router's IP address
10 [ALL-1.4] How to reset Tenda device to factory default
11 [ALL-4] Wireshark capture Router interface packet operation guide
12 [Switch-2.3] Computers cannot access the Internet after connecting to the switch
13 [ALL-1.7] How to find the hardware version on a Tenda device

TEF1110P-8-63W 10-Port 10/100M Desktop Switch with 8-Port PoE

TEF1110P-8-63W is an unmanaged PoE switch with 2 uplink ports, independently designed by Tenda. Compliant with IEEE 802.3at/af standards, it can identify PoE-powered devices intelligently. The switch supplies a maximum PoE power output of 58 W, and 30 W for a single port. Featured with extend mode, One-key VLAN and QoS functions, TEF1110P-8-63W is a ideal choice for SMBs, supermarkets and restaurants with small-sized video surveillance requirement.

Explore

Network standards	IEEE 802.3/3u/3x, IEEE 802.3af/at
LED Indicator	10* Link/Ack LED indicators 1 * Power LED indicator
Interfaces	8 * 10/100 Base-TX Ethernet ports (Data/Power) 2 * 10/100 Base-TX Ethernet ports (Data)
Transmission media	Recommended: CAT5/5e UTP or better
Dimension	177.5mmx104.0mmx26.0mm
Level of protection	Lightning protection for ports: 6KV Lightning protection for power: 4KV ESD: Air discharge: ±10kV Contact discharge: ±8kV
Forwarding mode	Store-and-forward
Switch capacity	1.6 Gbps
Packet forwarding rate	1.48Mpps
Buffer	448K
MAC address table	1K
PoE budget	Single port: AF: 15.4W, AT: 30W Whole device: 58W
Power consumption	/
Input voltage	100－240V AC 50/60Hz 51V /1.25A DC（Power Adapter ）
Mounting	Desktop mounting: support Wall mounting: support Rack mounting:non-support
Environment	Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing
Certification	FCC、CE、RoHS
Funtions	Default Mode: If Default mode is enabled, the device works as a general switch and all ports support 10/100Mbps auto-negotiation. Extend Mode:VLAN isolation is enabled. Port 1-8 will be isolated respectively (10/100Mbps auto-negotiation), but can communicate with the Uplink port. And the delivery distance of powering and network data is up to 250m (10Mbps).