N301 v2.0 Firmware V12.01.01.50

Productos relacionados:N301

Upgrade Notes:

1. This firmware is only fit for N301v2.0 and its firmware version must be in V12.01.01.XX or more.

2. Do not power off the device when upgrading.

3. Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.

4. Please reset it to factory settings after upgraded it.


Release Notes:

1. Solved the issue that cannot log in via UC browser.

2. Solved the issue that device host name is too short to display garbled in wireless bridge.

3. Solved the issue that it will hang if there are more than 10 devices online in AP mode.

4. Added ACL rules in driver switch and receive packets that destination MAC is WAN MAC and drop the unicast packets if the

    destination MAC is not WAN MAC address.

5. Added the IP checking to avoid to modify illegal LAN IP or DHCP server.

Contacta con nosotros:

Fecha de actualización:2020/8/11
Por favor contáctenos si tiene alguna pregunta.  
support.mexico@tenda.cn