TEF1105P-4-63W _Tenda Kenya

TEF1105P-4-63W Download（6）
1TEF1105P-4-63W Installation Guide
2TEF1105P-4-63W CE
3Safety and Regulatory Information
4Tenda Lightning Protection Guide
5TEF1105P-4-63W Datasheet
6TEF1105P-4-63W HD Image
TEF1105P-4-63W FAQs（13）
1 [Switch-4] POE Switch with Camera Knowledge Explanation
2 [Switch-3] How to adjust the working mode of the switch and the role of these modes？
3 [Switch-1.2] How to access the management page of a managed switch
4 [Switch-4] Frequently Asked Questions about Switches
5 [Switch-2.5] Low Speed Common Troubleshooting steps for Tenda Switches
6 [Router/Gateways/Mesh-4.3] How to use Iperf to test the speed
7 [ALL-4] Why Tenda HTTPS Web Interface Is Detected As Unsecure by Some Web Browsers
8 [ALL-2.2] Why Do I Fail to Access tendawifi.com
9 [ALL-4] How to find your Tenda router's IP address
10 [ALL-1.4] How to reset Tenda device to factory default
11 [ALL-4] Wireshark capture Router interface packet operation guide
12 [Switch-2.3] Computers cannot access the Internet after connecting to the switch
13 [ALL-1.7] How to find the hardware version on a Tenda device

TEF1105P-4-63W 5-Port 10/100Mbps Desktop Switch with 4-Port PoE

TEF1105P-4-63W is a Tenda PoE switch that offers 5 10/100 Mbps Base-TX RJ45 ports. Up to 250 meters long distance transmission, beyond hundred meters transfer limit. 6KV lightning protection PoE switch is the real monitoring private switch. Ports 1-4 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides 30W maximum PoE output a single port and 58W the whole device.

Explore

Network standards	IEEE 802.3、 IEEE 802.3u、IEEE 802.3x、IEEE 802.3af、IEEE 802.3at
LED Indicator	5* Link/Ack LED indicators 1 * Power LED indicator
Interfaces	410/100 Base-TX Ethernet Ports(Data/Power) 110/100 Base-TX Ethernet Port(Data)
Transmission media	Recommended: CAT5/5e UTP or better
Dimension	100.0mmx100.0mmx26.0mm
Level of protection	Lightning protection for ports: 6kV Lightning protection for power: 6kV ESD: Air discharge: ±10kV Contact discharge: ±8kV
Forwarding mode	Store-and-forward
Switch capacity	1Gbps
Packet forwarding rate	0.74Mpps
Buffer	448K
MAC address table	1K
PoE budget	Single port: AF: 15.4W, AT: 30W Whole device: 58W
Power consumption	/
Input voltage	100－240V AC 50/60Hz 51V /1.25A DC（Power Adapter ）
Mounting	Desktop mounting: support Wall mounting: support Rack mounting:non-support
Environment	Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing
Certification	FCC、CE、RoHS
Funtions	Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other . Extend Mode: If the extend mode is enabled, the transmission distance of both power and data will extend up to 250m(10Mbps), this funcation can replace the extender and parts of the Fiber. It will extend the distance of the whole system and save the cost of the project.