TX12 Download(7)
TX12 FAQs(24)

TX12  AX3000 Dual Band Gigabit Wi-Fi 6 Router

AX3000 Dual Band Gigabit Wi-Fi 6 Router

The TX12 is a dual-band Gigabit Wi-Fi 6 wireless router designed specifically for home users who value performance. It supports mesh networking to solve the problem of Wi-Fi coverage in large houses. Both bands support Wi-Fi 6 (802.11ax) technology with a concurrent speed of up to 2976Mbps (2.4GHz: 574Mbps, 5GHz: 2402Mbps). It's also equipped with four 6dBi high-gain external omnidirectional antennas and four built-in high-performance FEMs, which enable stronger Wi-Fi penetration and longer transmission range. The TX12 uses OFDMA+MU-MIMO technology, which enables more devices to be connected simultaneously, significantly improving transmission efficiency and reducing latency.
   [Router/Mesh-2.1] What should I do if my router's Wi-Fi is slow
   [Router/Gateways/Mesh-4.3] How to use Iperf to test the speed
   [ALL-4] Why Tenda HTTPS Web Interface Is Detected As Unsecure by Some Web Browsers
   [ALL-2.2] Why Do I Fail to Access tendawifi.com
   [ALL-4] How to find your Tenda router's IP address
   [Router/Mesh/Gateway-2.5] Network Speed Q&A
   [MG-3] Gate How to set VPN
   [Router/Mesh-3.3] How to set Guest WiFi
   [Router/Mesh-4] The Questions Before Buying.——售前
   [Router-2.4] What should I do if the router disconnects on and off several times in one day or one week
   [Router/Mesh-2.3] What happened if my 2.4G or 5G WiFi(SSID) can't not find
   [Router-2] What should I do if the router get bricked
   [Router/Mesh-2.2] What should I do if the cloud account doesn't show up & keep buffering
   [Router/Mesh-3.1] How to Clone MAC Address on My Tenda Router
   How to set up the working mode which mode I should choose as a extenderrepeater
   [Router/Mesh-1.1] How to set up as an add-on node of Tenda router
   [ALL-1.4] How to reset Tenda device to factory default
   Tenda (Tenda) AX3000 Pro terminal device can not find the router wireless signal
   [Router-2.3] What should I do if I cannot access the Internet after my router is set up (New interface)
   [ALL-4] Wireshark capture Router interface packet operation guide
   How to find the proper MTU size for my network
   [Router-3.2] How to Change Channel and Channel Width on a Tenda Router
   [ALL-1.7] How to find the hardware version on a Tenda device
   [Router/Mesh-2.5] My speed is slow when I connect to router WiFi, what should I do