How to modify the SSID of AP

Caution：Please connect the routers, APs, following the network topology and make sure all the devices can connect to the internet. 

Step1:We need to open WLAN in our computer.Click start>> Setting>>Network&internet>>More network adapter options

Step2:We check our Gateway ip 192.168.5.1,but this aps default ip：192.168.0.X .them donnot keep the same network segment.We cannot login the Web UI of AP. we should modify to the same network segment between ap and pc. Click WLAN and go to properties>Internet Protocol Version 4 TCP/IPv4，change to Use the following IP address。Enter IP address 192.168.0.X, and Subnet mask :255.255.255.0. Save.

Step3: We can obtain the ip address of ap in the back of the machine. Open our browser and enter ip address of ap 192.168.0.254.just enter default User name and Password:admin.

Step4: We can check the version of device from Status.

Click system status，then you can see the Firmware version number. 

Step5: We can check the version of device from Status. Click system status，then you can see the Hardware version number.