FH456-How to setup AP mode

Function Config 最近更新時間 : 2018/10/13

Note: This article will guide you how to setup AP mode and the steps as below.

Step 1: Connect your computer to the LAN port. Power on the FH456.

You can also use your smartphone to configure the router.

Step 2: Open a Web Browser -> Type //tendawifi.com or 192.168.0.1 in the address bar -> Press Enter

Step 3: Go to Wireless repeating-> Click “AP Mode”, and click “OK” to save all the settings

After the reboot process is complete, please use ‘tendawifi.com’ to login to the Web UI.

In AP mode, any port of the router can be used to connect to the upstream router. In this mode, some functions are ineffective, including Internet Settings, Parental Control, Bandwidth Control, Virtual Server, and so on.

FH456-How to setup AP mode

下載 :
文件類別 : Function Config
相關產品 : FH456

MESH

路由器

調製解調器/網關

擴展器

適配器

Switches

Gateway

Optical Access

Enterprise Wireless

CPE&基站

Cloud Service

IP Camera

Video Security Kit

Network Video Recorder

服務支持

聯繫我們

如何購買

FH456 300Mbps Wireless N Smart Router常見問題

FH456-How to setup AP mode

這篇文章對你有幫助嗎？