O3 v2.0-How to setup AP mode

Function Config Dernière mise à jour : 2018/11/26

Note: This article will guide you how to setup AP mode and the steps as below. In this mode, the device creates a wireless network based on the current wired network.

Step 1: Connect the computer to the device

1.1 Open the plastic cover of O3.

1.2 Connect the PoE LAN/WAN port to the PoE injector.

1.3 Power on the O3, the LAN/WAN LED indicator of the O3 lights up.

1.4 Connect your computer to the LAN port of the PoE injector.

Step 2: Enter management interface of O3

2.1 Open a Web Browser -> Input 192.168.2.1 in the address bar -> Press Enter

2.2 Type the default username and password (admin for both defaults) and click “Login”.

Step 3: Select AP Mode

3.1 Click “Quick setup”, select “AP”.

3.2 Modify custom local wireless network parameters and click “Next”.

3.3 Click “Save”.

The Current Mode is AP Mode.

O3 v2.0-How to setup AP mode

Téléchargement :
Catégorie de document : Function Config
Produits associés : O3 1-pack

Wi-Fi dans toute la maison

Routeurs

Modems/ passerelles

Extension du réseau

Adaptateurs

Switches

Gateway

Optical Access

Enterprise Wireless

CPE&Basestation

Cloud Service

IP Camera

Video Security Kit

Network Video Recorder

FAI

Contactez-nous

Où acheter

O3 1-pack 5km Point to Point Outdoor CPEFAQ

O3 v2.0-How to setup AP mode

Cet article vous a-t-il été utile ?