Function introduction;
Tenda NVR supports setting the scheduled restart of SMB cameras directly on the WEB interface, and supports the setting of camera alarm information.
Operation Introduction:
1. Use Google browser first, connect the computer and NVR via a wired cable or let the computer and NVR use the same WIFI to ensure that the computer and NVR are in the same LAN.
2. Enter the IP address of the NVR in the address bar of the browser page, enter the login interface of the NVR, and log in after entering the username and password.
3. Scheduled restart: After logging into the web interface, click Configuration-Automatic Maintenance. On the right, you can select the time and schedule you want to restart and then click Save.
4.Alarm:
Click Configuration-Alarm to enter the alarm configuration interface, and click Motion Detection to configure. In the detection settings, you can adjust the camera's detection range and sensitivity, in Arming Sched, you can set the alarm schedule, and in linkage Action, you can set the alarm linkage action,such as monitor pop-up window, email sending, message notification, etc.
5. The configuration methods of tempering detection, audio and light alarm, and exception detection can refer to motion detection