Model number: W300D V6.0

This article will guide you how to setup Tenda W300D dynamic IP in wireless routing mode and the steps as below.

Part 1: Connect the devices

Part 2: Configure your computer

Part 3: Setup the router

Part 4: Check whether you can access internet

 

1.   Connect the Ethernet cable with the LAN 4 of W300D, and then connect your computer with other LAN port of W300D by a cable.

1. Click on Network Connection Icon on the system bar, and then click on Open Network and Sharing Center.

2. Click on Change adapter settings.

3. Right click on Local Area Connection, then choose the Properties option.

4. Double click on Internet Protocol Version 4(TCP/IPv4).

5. Choose Obtain an IP address automatically and Obtain DNS server address automatically and then click OK.

 

6 Also click on OK on the first Local Connection Properties window.

3.1 Open a browser then type 192.168.1.1 in the address bar, click on enter. Type the username and password as admin in the bars then click on login to login the setting page of the router.

3.2 Click on “Advanced” in the top right corner of interface.

3.3 Click quick setup and then click next.

3.4 Select wireless routing mode, click next.

3.5 Choose “Dynamic or Static IP”, click next.

3.6 Choose “Dynamic IP”, click next.

3.7 Change your WiFi SSID and security key, and then click next.

3.8 Click “Save” to save all the settings.

3.9 Click “Reboot Now” to reboot W300D.

4.1 If connection status shows Connected in the home page that means you can access Internet.