 mode for the router.files/image001.png)
How to choose wireless WAN(WISP) mode for the router?
Product line: Wireless Question category: Function configurations
Q:Why do we choose the Wireless WAN(WISP) mode?
A：Sometimes we want the router to be a wireless repeater to the uplink wireless signal. You can achieve this through choose Wireless WAN for the router
The conncetion structure as follows:
 mode for the router.files/image002.jpg)
Key points:
The LAN IP address should be in defferent network segment. For example,if the LAN IP of the uplink router is 192.168.10.1, you can set the secondary router’s LAN IP as 192.168.0.1.
Steps are as below:
1. Login to the router’s homepage by typing //192.168.0.1 in the address bar in web browser.
2. Click Advanced settingsàWAN Medium Type, you’ll see a page as follows.
 mode for the router.files/image003.png)
3. Choose Wireless WAN and click Open Scan, you will find the uplink wireless router’s signal.
 mode for the router.files/image004.jpg)
4．Choose the uplink router’s wireless signal and click OK.
 mode for the router.files/image005.jpg)
5. The uplink wireless router’s SSID will be added to the blank of SSID, then please choose the same Security Mode/encryption type as the uplink wireless router, and please input the uplink wireless router’s security key in the blank of Pass Phrase. Then click Apply to save the settings.
 mode for the router.files/image006.jpg)
Note:
The router’s LAN IP should be in different IP network with uplink wireless router’s LAN IP.
For example:
Uplink wireless router’s LAN IP: 192.168.10.1
Router’s LAN IP: 192.168.0.1
.
