FH456-How to setup Universal Repeater

Function Config Última actualización : 2018/10/13

Note: This article will guide you how to setup Universal Repeater mode and the steps as below.

Step 1: Connect your computer to the LAN port.Power on the FH456.

You can also use your smartphone to configure the router.

Step 2: Open a Web Browser -> Type //tendawifi.com or 192.168.0.1 in the address bar -> Press Enter

Step 3: Go to “Wireless repeating”-> Click “Universal Repeater”

Step 4: Select “Upstream WiFi Name”, type password in “WiFi Password”, click “OK” to save all the settings.

Note: For the convenience of management, when you setup Universal Repeater mode, we have to make sure this router IP address is different from upstream router IP address, but in the same network segment. Such as if the upstream router IP address is 192.168.2.1,we have to change this router IP address to 192.168.2.X, X∈(2-254).

After reboot, connect LAN1/LAN2/LAN3 port of router, or reconnect wireless signal of the router, try whether you can surf the internet.

FH456-How to setup Universal Repeater

Descargas :
Categoría de documento : Function Config
Productos relacionados : FH456

Sistemas Mesh Wifi para el hogar

Routers

Módems / Gateways

Expansión de la red

Adaptadores

Switches

Gateway

Optical Access

Enterprise Wireless

CPE y estación base

Cloud Service

IP Camera

Video Security Kit

Network Video Recorder

Proveedor de servicio

Contáctanos

Donde comprar

FH456 Router inteligente N inalámbrico de 300 MbpsPreguntas frecuentes

FH456-How to setup Universal Repeater

¿Te ayudó este artículo?