(Tenda)F3-How to bind the IP address with your device

Function Config Última actualización : 2018/9/21

User Scenario:

When other device is connected with router, the DHCP server of router will allot an IP address in its Network segment, 192.168.0.x as default. You can bind some IP address with your device so that the IP address is for your device only. Also, your device would get a fixed IP address.

Step 1: Enter the configuration page of your router.

1. Open a browser then type “192.168.0.1” into the Address Bar, press Enter. Then enter the password of this page. Tap “Login”.

Note: The default password is shown on the bottom of the router. If you have changed it and you also forgot it, see “Forget your password?” below the “Login” button.

2. Then the interface will turn into the homepage, tap “Advanced”. You can see “Static IP” in this page.

Step 2: Bind one IP with your device. Type the IP address you want to bind for your device in “IP Address” bar, and type the MAC in “MAC Address” bar, and tap the button below “Action” to apply it. Then tap “OK” to save these settings.

Step 3: Then you can see the IP address successfully bind to your device via its MAC address.

(Tenda)F3-How to bind the IP address with your device

Descargas :
Categoría de documento : Function Config
Productos relacionados : F3

Sistemas Mesh Wifi para el hogar

Routers

Módems / Gateways

Expansión de la red

Adaptadores

Switches

Gateway

Optical Access

Enterprise Wireless

CPE y estación base

Cloud Service

IP Camera

Video Security Kit

Network Video Recorder

Proveedor de servicio

Contáctanos

Donde comprar

F3 Router inalámbrico de 300 MbpsPreguntas frecuentes

(Tenda)F3-How to bind the IP address with your device

¿Te ayudó este artículo?