RX27 Pro Videos(1)
RX27 Pro Download(9)
RX27 Pro FAQs(24)

RX27 Pro  AXE5700 Tri-Band Gigabit Wi-Fi 6E Router

AXE5700 Tri-Band Gigabit Wi-Fi 6E Router

RX27 Pro is a Gigabit Wi-Fi 6E router designed for users who are looking for a performance experience. It supports Wi-Fi 6E, which can bring more bandwidth, faster speed, and near-zero latency. It has a concurrent rate of up to 5665 Mbps (6GHz: 2402 Mbps, 5GHz: 2402 Mbps, 2.4GHz: 861 Mbps). Besides, RX27 Pro is equipped with 7 high-power FEMS, the Wi-Fi signal penetrates the wall stronger and the transmission distance is longer. And It's equipped with Broadcom 1.7GHz quad-core CPU, delivering powerful computing power, and stable operation. With the OFDMA and MU-MIMO technology, more devices can access the Internet at the same time, the transmission efficiency is significantly improved, and the delay is greatly reduced.
   [Router/Mesh-2.1] What should I do if my router's Wi-Fi is slow
   [ALL-4] Why Tenda HTTPS Web Interface Is Detected As Unsecure by Some Web Browsers
   [Router/Gateways/Mesh-4.3] How to use Iperf to test the speed
   [ALL-2.2] Why Do I Fail to Access tendawifi.com
   [ALL-4] How to find your Tenda router's IP address
   [Router/Mesh/Gateway-2.5] Network Speed Q&A
   [MG-3] Gate How to set VPN
   [Router/Mesh-3.3] How to set Guest WiFi
   [Router/Mesh-4] The Questions Before Buying.
   [Router-2.4] What should I do if the router disconnects on and off several times in one day or one week
   [Router/Mesh-2.3] What happened if my 2.4G or 5G WiFi(SSID) can't not find
   [Router-2] What should I do if the router get bricked
   [Router/Mesh-2.2] What should I do if the cloud account doesn't show up & keep buffering
   [Router/Mesh-3.1] How to Clone MAC Address on My Tenda Router
   How to set up the working mode which mode I should choose as a extenderrepeater
   [Router/Mesh-1.1] How to set up as an add-on node of Tenda router
   [ALL-1.4] How to reset Tenda device to factory default
   Tenda (Tenda) AX3000 Pro terminal device can not find the router wireless signal
   [Router-2.3] What should I do if I cannot access the Internet after my router is set up (New interface)
   [ALL-4] Wireshark capture Router interface packet operation guide
   How to find the proper MTU size for my network
   [Router-3.2] How to Change Channel and Channel Width on a Tenda Router
   [ALL-1.7] How to find the hardware version on a Tenda device
   [Router/Mesh-2.5] My speed is slow when I connect to router WiFi, what should I do