AC10Uv2.0 Firmware V16.03.16.12

Hardware Version: V2.0

Software Version: V16.03.16.12

Upgrade Notes:

1. This firmware is only fit for AC10UV2.0 and its firmware version must be in V16.03.16.XX or more.

Note: The hardware version marked at the lable of devices as below:

2. Do not power off the device when upgrading.

3. Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.

4. Please reset it to factory settings after upgraded it.

Release Notes:

1. Fixed the issue that cannot pass the quick install guide via Web and APP.

2. Fixed the issue that IPv6 does not use public DNS server with no RDNSS in stateless.

3. Fixed the issue that IPv6 enabled when changed from AP mode or repeater mode to router even IPv6 disabled at original status.

4. Fixed the issue that IPTV obtained wrong IP after router reboot with Multicast and STB enabled.

Por favor contáctenos si tiene alguna pregunta.
support.cl@tenda.cn

AC10U v2.0 AC1200 MU-MIMO Dual Band Gigabit WiFi RouterDescargar