N301-How to setup MAC Address Filter

Function Config Last updated : 2018/12/4

Note: This article will guide you how to MAC Address Filter and the steps as below.

Step 1: Connect your computer to the LAN port of N301, and then power on the N301.

You can also use your smartphone to configure the router.

Step 2: Open a Web Browser -> Type 192.168.0.1 in the address bar -> Press Enter

Step 3: Go to Advanced -> MAC Address Filter, and then you can select the filter mode.

Step 4: Type MAC Address that you want to filter in “MAC Address” bar, and then click the “+” to apply it, and then click “OK” to save these settings.

N301-How to setup MAC Address Filter

Download :
Document category : Function Config
Related products : N301

Whole-Home Wi-Fi

Routers

Modems/ Gateways

Network Expansion

Adapters

Switches

Gateway

Optical Access

Enterprise Wireless

CPE&Basestation

Cloud Service

IP Camera

Video Security Kit

Network Video Recorder

N301 Wireless N300 Easy Setup RouterFAQs

N301-How to setup MAC Address Filter

Was this article helpful to you?