W6-S - Wireless Configuration

Function Config Last updated : 2018/10/27

1. Click on “Wireless”, then click “Channel Scan” to see the details of channel around you.

Usage Scenario: Scan the channel around you If you want to change another channel on the “RF” option but you are not sure which channel is appropriate to your situation.

2. Click on “Wireless” and click “WMM Setup”, “Enable” the option is recommended.

3. Click on “Wireless” and click “Access Control” to edit the devices are connected to the W6-S If you want to filter some devices MAC Address.

Note: Remember to “Save” the configuration.

4. Click on “Wireless” and click “QVLAN Setup”, then you can configure VLAN for W6-S.

Note: Remember to “Save” the configuration.

W6-S - Wireless Configuration

Download :
Document category : Function Config
Related products : W6-S

Whole-Home Wi-Fi

Routers

Modems/ Gateways

Network Expansion

Adapters

Switches

Gateway

Optical Access

Enterprise Wireless

CPE&Basestation

Cloud Service

IP Camera

Video Security Kit

Network Video Recorder

W6-S N300 in-wall Wireless Access PointFAQs

W6-S - Wireless Configuration

Was this article helpful to you?