(Tenda)F3-How to setup WISP mode

Function Config Last updated : 2018/9/25

Step 1: Login the homepage.

1. Open a browser then type “192.168.0.1” into the Address Bar, press Enter. Then enter the password of this page. Tap “Login”.

Note: The default password is shown on the bottom of the router. If you have changed it and you also forgot it, see “Forget your password?” below the “Login” button.

2. Then the interface will turn into the homepage, tap “Wireless Repeating”, you can see “WISP” option in this page.

Step 2: Setup WISP

1. Tap “WISP”, select your uplink Wi-Fi signal, type its password, and tap “OK” to save all the settings.

2. Tap “OK” on the pop window, then the router will reboot automatically.

3. After rebooting, login the homepage again, and tap “Status” to check the Connection Status of router. If the Connection Status is shown as below, that means you setup WISP successfully.

(Tenda)F3-How to setup WISP mode

Download :
Document category : Function Config
Related products : F3

Whole-Home Wi-Fi

Routers

Modems/ Gateways

Network Expansion

Adapters

Switches

Gateway

Optical Access

Enterprise Wireless

CPE&Basestation

Cloud Service

IP Camera

Video Security Kit

Network Video Recorder

F3 300Mbps wireless routerFAQs

(Tenda)F3-How to setup WISP mode

Was this article helpful to you?