PH5-How to reset a device to factory default

Function Config Last updated : 2018/7/19

Method 1:

Step 1: Open bowser and enter plc.tendawifi.com in address bar to login the setup page.

Step 2: Choose “Administration” > “Device Management”.

Step 2: Tap “OK” to reset the device.

Method 2:

Step 1: Find the Reset button on the side of the PLC.

Step 2: Press the reset button for 8 seconds until all lights on and then off few seconds later.

PH5 AV1000 Wi-Fi Powerline Extender KitFAQs