UG2 - How to install the hardware

Internet Setup Последнее обновление : 2016/1/5

Model number: UG2

This article will guide you how to install the hardware.

Part 1: Open the case of the computer

Part 2: Plug the Ethernet interface card

Part 3: Tight the screws

Part 4: Connect to the Internet

1. Disconnect your PC from power supply and open the case.

2. Plug the Ethernet interface card into the PCI-E.

3. Fix the Ethernet interface card by tightening the screws on the case.

4. Use Ethernet cable to connect to Internet.

UG2 Gigabit PCI Express Network AdapterБаза знаний