Product line: AP Modelnumber: I12
This article willguide you how to modify SSID and password of I12 and the steps as below.
Part 1: Installation the devices
Part 2: Configure your computer
Part 3: Login management interface
Part 4: Modify SSID and password
1. Power on the AP, and connect your PC to one of the LAN ports by a cable, as the following illustration;
2. Click on Change adapter settings.
3. Right click on Local Area Connection, then choose the Properties option.
4. Double click on Internet Protocol Version 4(TCP/IPv4).
5. Choose Use the following IP address and Use the following DNS server addresses and then Set a static IP forlocal area connection within the following range: 192.168.0.X( 1-253),and with the subnet mask: 255.255.255.0 and Default gateway with 192.168.0.254;
6. Also click on OK on the first LocalConnection Properties window.
1.Launch IE browser, input 192.168.0.254 in the address bar and press Enter;
2.Type in the default username and password( admin for both) and click Login;
1.Click Wireless item then choose Basic and then please modify SSID and password according to the screenshot.
1. Change SSID for bettersuggestion when modifying wireless password.
2. Wireless will disconnect aftermodifying SID and password, so it should be connected by scanning again.