AC15-How to setup Static IP mode

There are threeinternet connection modes for the router. This article will guide you how tosetup the router for Static IP mode and the steps as below.

Modelnumber: AC15          Question Classification: Internet Settings


Note: If youhave no idea about what is the internet connection type and the accounts pleasecall your ISP for them.

Part 1:Connect the devices

Part 2:Configureyour computer

Part 3:Setupthe router

Part 4:Check whether you can accessinternet


Connectthe Ethernet cable with the WAN port of the router, and then connectyour computer with one of the LAN ports by a cable.



1 Clickon Network Connection Icon on the system bar, then click on OpenNetwork and Sharing Center.


2 Clickon Change adapter settings.


3Right clickon Local Area Connection, then choose thePropertiesoption.


4Double clickon Internet Protocol Version 4(TCP/IPv4)


5 Choose Obtain an IP address automatically andObtainDNS server addressautomatically and then click OK.

 obtain IP.png

6 Alsoclick onOK on the first Local Connection Properties window.





NoteWe need to skip the quick setup to go toadvanced settings page to configure if your network connection mode is StaticIP.

1.Open a browser then typehttp://tendawifi.com in the Address bar, click on Enter.

2.Click on Start.

3. Click on Skip so that we can go to advance to setup thestatic IP connection mode.

4.Choose your country, setup the wireless name and wirelesspassword. You need to set a login password as well. Then click on Next.


Note: the Wireless password should be at least 8 characters.

The Loginpassword should be 5~32 characters.

5. Click on Internet Settings, select the connection typeas StaticIP. Then input the related network info that your ISP gives you. Click Save.


1.   Click on Internet Status, if it shows Connected, means you can get internet. Enjoy it.



When the Connection Status Show Connecting, please try the steps as below.

1.Click SystemSettingsàWANsettings,you will see a pop-up window.

2.InWAN Config, pelase choose Clone MAC Address in the drop-menu. Then click Save.

(Tenda)AC15-How to setup Static IP mode

0Very Good2109Article Views