FAQ

AP5-How to configure the AP mode

Howto setup the AP mode?

Modelnumber: AP5

Thereare five operation mode for this CPE. The most basic mode of multi-function isAccess Point. In this mode, the AP will act as a central hotspot for differentwireless LAN clients.

Part1:Connect the device

Part2: Set up the AP mode

Part3:Check whether you can accessinternet

Connectone of the port to the router which can access internet, then connect your computerwith the other LAN ports of the router by a cable. Or you can connect theAP via wifi.

Note:After connection the SYS light should be blinking, the WLAN light should be onor blinking.

1 A wirelessaccess point can’t provide the IP address for your computer.

You should setan IP address for your computer manually before login to the homepage ofthe AP. The default IP address of this AP is 192.168.0.254, so the IPaddress of your computer should be 192.168.0.XXX (1<=XXX<=253).

Open a browserthen type 192.168.0.254 in address bar, click Enter.

Note:if you cannot login the home page, please click HERE

2Fill in user name and password as admin/admin, and choose the country. click Login to login.

 

1choose Quick Setup—AP, then click Next.

2This page you can change SSID, Channel, Security Mode, Encryptiontype, WiFi password. Then click Next.

Note:

I: the Channel 1,Channel 6 and Channel 11 are recommended.

II: Choose the Securitymode as WPA-PSK, Encryption Type choose the AES option.Then set a WiFi password as you want, The password should be 8characters at least.

 

3Click Save. The router will reboot.

 

Useyour laptop or mobile phone to connect the wireless SSID, then type in thepassword to access the internet.

1Very Good589Article Views