FAQ

how to establish the private network of P1002P

1  Two powerline adapters establish the privatenetwork.

 For examplePowerline adapter 1,powerline adapter 2, establish the private network.

The steps of setting:

Please keep pressing the Pair/Resetbutton of powerline adapter 1 for 1~3 seconds, the PLC light will blink.

Please keep pressing the Pair/Reset button of powerlineadapter 2 for 1~3 seconds in 2 minutes, the PLC light will blink.  When PLClight of two powerline adapters changes into bright state normally, theyestablish the powerline network successfully.

2  The powerline adapteradds the private network having been established.

 Forexample: If the powerline adapter 1 and adapter 2 have established the private networkN1, you want to add the powerline adapter 3 into N1.

The steps of setting:

Pleasekeep pressing the Pair/Reset button of the powerline adapter, 3 for 1~3seconds, its  PLClight will blink, which means the powerline  adapter 3 is checking the networkN1.

 

Please keep pressing the Pair/Reset button of thepowerline adapter 1 for 1~3 seconds in 2 minutes, its  PLClight will blink, which means they are pairing automatically.

The powerline adapter3 adds into the private network N1 successfully when   PLClight should be on stably.

3 The powerline adapter disconnects the private network.

 ForexampleThe powerline adapter 1, adapter 2 and adapter 3 haveestablished the private network, but the powerline adapter 3 disconnects the privatenetwork.

Thesteps of setting:

Please keeppressing the Pair/Reset button of the powerline adapter 3 for up 6 seconds, its  PLClight will blink for three times, which means it disconnects the privatenetwork and restores to the factory default setting.

 

0Very Good390Article Views