FAQ

FH1206-How to setup the router for PPPOE internet connection mode?

How to setup therouter for PPPOE internet connection mode

Productline: Wireless    Model number: FH1206

There are threeinternet connection modes for the router. This article will guide you how tosetup the router for PPPOE mode and the steps as below.

Note: if youhave no idea about the internet connection type and the accounts please callyour ISP for then.

Part 1:Connectthe devices

Part 2: Configureyour computer

Part 3: Setupthe router

Part 4:Checkwhether you can access internet

Connectthe modem with the WAN port of the router, then connect your computerwith one of the LAN ports of the router by a cable.

Note:After connection the SYS light should be blinking, the WLAN lightshould be on or blinking, the WAN light should be on or blinking.

 

1 Clickon Network Connection Icon on the system bar, then click on OpenNetwork and Sharing Center. (Here is for windows 7, other operating systemplease click HERE.)

2Clickon Change adapter settings.

3Right clickon Local Area Connection, then choose Properties option.

4Double clickon Internet Protocol Version 4(TCP/IPv4)

5ChooseObtain an IP address automatically and Obtain DNS server addressautomatically and then click OK.

6Alsoclick on OK on the first Local Connection Properties window

1 Open a browser then type 192.168.0.1 in theAddress bar, click Enter.

Note: if you cannot login the management page, please click HERE.

2 Type the Password as admin, and then click on Loginbutton to login the setting page.

3 Choose the PPPOE option, then typethe ISP Username and ISP Password in the correct bars, then set a2.4GSecurity as you want, click on Save to save thesettings, then click on Advanced to login the advanced setting page.

Note: the 2.4G Security should be at least 8 characters.

4 Click on Tools, then click on Reboot, and thenpress the Reboot button to reboot the router for refreshing the deviceinfo.

Typethe User Name and Password as admin then Click on Advanced to login theadvances setting page, and then check on the Status if the WANStatusshows Connected that means you can access internet, please check.

NOTE:

1,When the ConnectionStatus show Disconnect, it means that there are some problem withthe WAN Connection. please check hardware connection.

2, When theConnection Status Show Connecting, please try the steps as below

a, clicknetworkàMACCloneàCloneMACto clone your computer’s mac address to the router’s WAN port, then click Saveto save the setting and click Reboot.

b, clickNetworkàLANàIP address, changeit to 192.168.5.1, click Save to save the setting and the router willreboot automatically.

 

C, ifthe Connection Status is still Connecting, please reboot themodem and router together.

 

 

2Very Good631Article Views