FAQ

FH304-How to setup the router for Dynamic IP internet connection mode?

How to setup therouter for Dynamic IP internet connection mode

Modelnumber: FH304

There are threeinternet connection modes for the router. This article will guide you how tosetup the router for Dynamic IP mode and the steps are as below.

Note: if youhave no idea about internet connection type and accounts please call your ISPfor help.

Part 1:Connectthe device

Part 2: Configureyour computer

Part 3: Setup the router

Part 4:Checkwhether you can access internet

Connectthe modem with the WAN port of the router, and then connect yourcomputer with one of the LAN ports of the router by a cable.

Note: after connection the SYS light should be blinking, the WLANlight should be on or blinking, the WAN light should be on or blinking.

1 Click NetworkConnection Icon on the system tray, then click Open Network and SharingCenter. (Here is for windows 7, other operating systems please click HERE.)

2Clickon Change adapter settings.

3Right clickLocal Area Connection, then choose Properties option.

4Double clickInternet Protocol Version 4(TCP/IPv4)

5ChooseObtain an IP address automatically and Obtain DNS server addressautomatically and then click OK.

6Alsoclick OK on the first Local Connection Properties window

1 Open a browser then type 192.168.0.1in the address bar, click Enter.

Note: if you cannot login the home page, please click HERE.

2 Fill admin in the Password field, click OK to Login.

3 Choose the Dynamic IP option, then set a SecurityKeyfor the wireless security, then click OK to save the settings, thenclick Advanced.

Note:the Security Key should be at least 8 characters.

4 Click Tools, click Reboot, and then press the RebootThe Router button then click OK for refreshing the device info.

Typethe User Name and Password as admin to login the setting page then click Advanced,and then check status if the ConnectionStatus shows connectedthat means you can access internet, please check.

 

0Very Good184Article Views